Insufficient Edge Ports
Endpoints, uplink and maintenance access can consume more ports than the first device count suggests.
CONNECTION NEED
Plan a Verified Industrial Ethernet Edge Network
Aggregate compatible PLCs, HMIs and monitoring endpoints with a switch selected for the actual topology, traffic, cabinet power and environment.
Use a simple unmanaged edge only when the network design does not require switch-level VLAN configuration, remote telemetry or redundant-path control.
Since 2006OEM/ODM SupportGlobal B2B Service
FIELD TO NETWORK
Uplink Capacity
Concurrent controller, monitoring and image traffic must fit the shared uplink and connected-device rates.
Cabinet Conditions
Supply voltage, temperature, ventilation and mechanical installation must match the exact model.
Missing Network Control
An unmanaged role is unsuitable when local VLANs, remote diagnostics or verified redundancy are required.
SOLUTION ARCHITECTURE
A Clear Path from Field Device to Operational Data
Use the interface and network constraint to define each connection layer before selecting a model.
Ethernet Endpoints
PLC · HMI · Monitoring
Ethernet
Selected Edge Switch
SW1000 or SW2000
Ethernet
Approved Uplink
Documented loop-free path
Ethernet
Plant Network
Host · SCADA · Network owner
RECOMMENDED PRODUCTS
Verified DTECH Products for This Solution
Only products with confirmed data and active detail pages are presented.
Industrial Ethernet Switches
SW1000 Series
Provides verified 5-port or 8-port Fast Ethernet/Gigabit aggregation with dual DC 12–52V and -30°C to 70°C operation.
- 5 or 8 Ethernet ports
- Fast Ethernet / Gigabit variants
Industrial Ethernet Switches
SW2000 Series
Provides verified 5-port or 8-port Fast Ethernet/Gigabit aggregation with model-specific DC input and -40°C to 85°C operation.
- 5 or 8 Ethernet ports
- Fast Ethernet / Gigabit variants
APPLICATION SCENARIOS
Designed Around Real Project Conditions
Start with the operating environment, installed interfaces and required communication path.
APPLICATION
Machine Control Cabinets
Join compatible controllers, HMIs and monitoring devices through one approved uplink.
Discuss This Application
APPLICATION
Utility Monitoring Cabinets
Aggregate monitoring terminals after verifying power, enclosure and temperature conditions.
Discuss This Application
APPLICATION
Transportation Edge Access
Provide local Ethernet connectivity where the documented unmanaged function fits the network design.
Discuss This ApplicationCUSTOMER VALUE
Build a More Predictable Connectivity Project
Turn interface choices into measurable project outcomes and a clearer delivery plan.
Explicit Port Budget
Count endpoints, uplink and service access before selecting a five-port or eight-port model.
Rate-Based Selection
Choose the verified FT or GT variant by endpoint rates and aggregate uplink demand.
Environmental Fit
Compare the exact operating range, power input and DIN-rail installation with cabinet conditions.
Defined Functional Boundary
Use a separately documented managed role when VLANs, telemetry or automatic path recovery are required.
Layered Commissioning
Check power, each link, device addressing and representative application traffic independently.
Selection Review
Share the cable map, device list, traffic and supply arrangement for model confirmation.
ENGINEERING RESOURCES
View Technical Blog Continue Your Product Evaluation
01020304
When to Use an Unmanaged Industrial Ethernet Switch
Check topology, ports, rate, temperature, power and management requirements before selecting SW1000 or SW2000.
Product Selection Guides
Choose the right interface, network path and product role.
Application Notes
Review practical deployment guidance for industrial environments.
Technical Blog
Explore serial communication and industrial networking insights.
REQUEST A SOLUTION
Need the Right Connectivity Architecture for Your Project?
Share your interfaces, communication distance, network type and installation environment. DTECH will help confirm the product roles and next selection step.
Serial interfaceNumber of devicesCommunication distanceNetwork typePower inputInstallation environment
ying@dtech.cn