Legacy Device Integration
Installed RS232, RS485 and RS422 devices cannot connect directly to modern IP networks.
INDUSTRIAL CONNECTIVITY SOLUTION
Connect Legacy Serial Devices to Modern Industrial Networks
Connect RS232, RS485 and RS422 devices to Ethernet, wireless and industrial networks with reliable DTECH communication solutions.
Build a practical data path from field equipment to SCADA, control centers and industrial IoT platforms without replacing proven serial assets.
Since 2006OEM/ODM SupportGlobal B2B Service
FIELD TO NETWORK
Communication Distance
Long cable routes and distributed equipment increase signal and installation risk.
Multi-Device Complexity
Different interfaces, branches and protocols make expansion and troubleshooting slower.
Industrial Interference
Electrical noise and ground potential differences can interrupt critical field data.
SOLUTION ARCHITECTURE
A Clear Path from Field Device to Operational Data
Use the interface and network constraint to define each connection layer before selecting a model.
Field Devices
PLC · Sensor · Smart Meter
RS232RS485RS422
Serial Interfaces
Convert · Isolate · Distribute
TTLSerial
DTECH Connectivity
Converters · Servers · Wireless
DTECH
Industrial Network
SCADA · Control Center · IoT
EthernetLoRa
RECOMMENDED PRODUCTS
Verified DTECH Products for This Solution
Only products with confirmed data and active detail pages are presented.
Serial Device Servers
IOT9031B (2nd)
Bridges RS422/RS485 field data to Ethernet for centralized monitoring.
- RS422 / RS485 serial interface
- 10/100M Ethernet
Industrial Ethernet Switches
SW1000 Series
Aggregates industrial Ethernet connections at the network edge.
- 5 or 8 Ethernet ports
- Fast Ethernet / Gigabit variants
Industrial Serial Hubs, Repeaters and Isolators
IOT9024I
Isolates and distributes multi-branch RS485 networks.
- Four independent RS485 branches
- 2500Vrms isolation per port
Industrial Serial Converters
IOT9005
Converts and isolates RS232 signals for embedded and field equipment integration.
- RS232 to 3.3V TTL conversion
- 2500Vrms isolation
APPLICATION SCENARIOS
Designed Around Real Project Conditions
Start with the operating environment, installed interfaces and required communication path.
APPLICATION
Smart Manufacturing
Connect PLCs, instruments and legacy machines to plant monitoring.
Discuss This Application
APPLICATION
Energy Monitoring
Collect distributed meter and field-device data.
Discuss This Application
APPLICATION
Building Automation
Consolidate access, metering and controller data.
Discuss This ApplicationCUSTOMER VALUE
Build a More Predictable Connectivity Project
Turn interface choices into measurable project outcomes and a clearer delivery plan.
Simplified Integration
Connect existing field equipment to modern monitoring networks without replacing proven devices.
Reliable Communication
Create a clearer, protected data path across demanding industrial environments.
Lower Deployment Risk
Select verified product roles around the interface, distance and installation constraints.
Flexible Expansion
Add endpoints and network segments without redesigning the entire system.
Faster Project Delivery
Use repeatable architectures to accelerate product selection and commissioning.
Engineering Support
Share project requirements with DTECH for model confirmation and connection guidance.
ENGINEERING RESOURCES
View Technical Blog Continue Your Product Evaluation
REQUEST A SOLUTION
Need the Right Connectivity Architecture for Your Project?
Share your interfaces, communication distance, network type and installation environment. DTECH will help confirm the product roles and next selection step.
Serial interfaceNumber of devicesCommunication distanceNetwork typePower inputInstallation environment
ying@dtech.cn