Legacy Device Integration
Installed RS232, RS485 and RS422 devices cannot connect directly to modern IP networks.
CONNECTION NEED
Connect Serial Devices to Industrial Ethernet Networks
Bring RS422 and RS485 field equipment onto IP networks for centralized monitoring and remote access.
Build a transparent serial-to-Ethernet path with industrial edge switching and practical network modes.
Since 2006OEM/ODM SupportGlobal B2B Service
FIELD TO NETWORK
Communication Distance
Long cable routes and distributed equipment increase signal and installation risk.
Multi-Device Complexity
Different interfaces, branches and protocols make expansion and troubleshooting slower.
Industrial Interference
Electrical noise and ground potential differences can interrupt critical field data.
SOLUTION ARCHITECTURE
A Clear Path from Field Device to Operational Data
Use the interface and network constraint to define each connection layer before selecting a model.
Serial Devices
Meters · PLCs · Controllers
RS485RS422
DTECH Device Server
Serial packet conversion
DTECH
Industrial Ethernet
Edge switching
Ethernet
SCADA / Host
Remote monitoring
RECOMMENDED PRODUCTS
Verified DTECH Products for This Solution
Only products with confirmed data and active detail pages are presented.
Serial Device Servers
IOT9031B (2nd)
Bridges RS422/RS485 field data to Ethernet for centralized monitoring.
- RS422 / RS485 serial interface
- 10/100M Ethernet
Industrial Ethernet Switches
SW1000 Series
Aggregates industrial Ethernet connections at the network edge.
- 5 or 8 Ethernet ports
- Fast Ethernet / Gigabit variants
Industrial Serial Hubs, Repeaters and Isolators
IOT9024I
Isolates and distributes multi-branch RS485 networks.
- Four independent RS485 branches
- 2500Vrms isolation per port
Industrial Serial Converters
IOT9005
Converts and isolates RS232 signals for embedded and field equipment integration.
- RS232 to 3.3V TTL conversion
- 2500Vrms isolation
APPLICATION SCENARIOS
Designed Around Real Project Conditions
Start with the operating environment, installed interfaces and required communication path.
CUSTOMER VALUE
Build a More Predictable Connectivity Project
Turn interface choices into measurable project outcomes and a clearer delivery plan.
Simplified Integration
Connect existing field equipment to modern monitoring networks without replacing proven devices.
Reliable Communication
Create a clearer, protected data path across demanding industrial environments.
Lower Deployment Risk
Select verified product roles around the interface, distance and installation constraints.
Flexible Expansion
Add endpoints and network segments without redesigning the entire system.
Faster Project Delivery
Use repeatable architectures to accelerate product selection and commissioning.
Engineering Support
Share project requirements with DTECH for model confirmation and connection guidance.
ENGINEERING RESOURCES
View Technical Blog Continue Your Product Evaluation
REQUEST A SOLUTION
Need the Right Connectivity Architecture for Your Project?
Share your interfaces, communication distance, network type and installation environment. DTECH will help confirm the product roles and next selection step.
Serial interfaceNumber of devicesCommunication distanceNetwork typePower inputInstallation environment
ying@dtech.cn