USB 2.0 to RS232 Conversion
Converts single-ended USB signals to standard RS232 signals in accordance with the source-listed USB 2.0 and RS232 TIA/EIA standards.
Loading DTECH products…
IOT5096I
USB to RS232 Opto-Isolated Serial Cable
Isolated USB-to-RS232 connectivity that helps protect serial equipment from ground loops and surge interference.
DTECH IOT5096I converts USB 2.0 signals to standard RS232 signals through a full-signal opto-isolated cable assembly.
Hover to zoomDTECH IOT5096I USB to RS232 opto-isolated serial cable on a white background
USB InterfaceUSB 2.0USB signal input
Serial InterfaceRS232TIA/EIA standard
IsolationUp to 6000VrmsFull-signal opto-isolation
Converter Length58 mmRS232 converter body
Product Overview
A practical path for bringing installed serial equipment into modern industrial data networks.
The IOT5096I is a USB 2.0 to RS232 signal isolation converter cable that changes single-ended USB signals into standard RS232 signals.
Its full-signal opto-isolation is specified up to 6000Vrms to help block ground-loop current and surge interference between connected equipment.
6000Vrmsmaximum stated isolation
Full-signal opto-isolation.
USB 2.0USB interface
Converts USB signals to RS232.
58 mmconverter length
Dimension shown on the model-matched source image.
Key Features
Core capabilities selected for reliable integration, flexible deployment and efficient maintenance.
Full-Signal Opto-Isolation
The legacy product source specifies full-signal opto-isolation with an isolation voltage up to 6000Vrms.
Ground-Loop Interference Blocking
The source describes the isolation design as blocking ground-loop currents and surge interference to help protect equipment and data.
Compact Cable Assembly
The model-matched dimensional image shows a 58 mm RS232 converter body, 37 mm body width and 23 mm USB connector length.
Industrial Applications
Explore practical deployment scenarios for this DTECH industrial connectivity product.
Industrial Automation
Provide isolated USB-to-RS232 connectivity for automation equipment and serial commissioning tasks.
Power Systems
Connect serial equipment where electrical isolation can help reduce ground-loop and surge-interference exposure.
Test & Measurement
Use with laboratory instruments and serial equipment that require a USB-to-RS232 connection.
Building and Security Systems
Support serial connections for building-control and security-monitoring equipment.
System / Network Architecture
See how this product fits into an industrial serial communication network.
USB 2.0 host connectionSingle-ended USB signals
Serial data
Protected branches
RS232 equipmentStandard RS232 signals with full-signal opto-isolation
Technical Specifications
Verified configuration details for engineering review and product selection.
Interfaces and Isolation
- Model
- IOT5096I
- USB interface
- USB 2.0
- Serial interface
- RS232 TIA/EIA
- Conversion
- Single-ended USB signals to standard RS232 signals
- Isolation technology
- Full-signal opto-isolation
- Isolation voltage
- Up to 6000Vrms
Mechanical Dimensions
- RS232 converter body
- 58 mm length x 37 mm width
- USB connector
- 23 mm length x 16.9 mm width
- RS232 connector width
- 16.8 mm
- Dimension note
- Source image notes that measurements are manual and may vary slightly.
Package Contents
- Included
- Serial cable x 1; storage bag x 1
Related Products
Explore complementary DTECH connectivity products for adjacent signal paths and network requirements.
Frequently Asked Questions
Verified answers for product selection and project planning.
What interfaces does the IOT5096I convert?
The verified legacy source identifies the IOT5096I as a USB 2.0 to RS232 converter cable compliant with USB 2.0 and RS232 TIA/EIA standards.
What isolation level is specified?
The product source specifies full-signal opto-isolation with an isolation voltage up to 6000Vrms.
What are the converter dimensions?
The model-matched dimensional image shows a 58 mm by 37 mm RS232 converter body. It also shows a 23 mm USB connector length; measurements are noted as manual and may vary slightly.
What is included in the package?
The source packaging image lists one serial cable and one storage bag.
Need Help Selecting the Right Product?
Share your device interfaces, network environment and project requirements with the DTECH industrial communication team.